| 007 |
Ramp Analog Sweep |
| 0BV |
Service Documentation, Component Level |
| 0BW |
Service Documentation, Assembly Level |
| 1CM |
Rackmount Kit |
| 1CN |
Handle Kit |
| 1CP |
Rackmount and Handle Kit |
| 1E1 |
Add step attenuator |
| 1EA |
High RF output power |
| 1ED |
Type-N RF output connector |
| 1EH |
Improved Harmonics below 2GHz |
| 1EM |
Moves all front panel connectors to rear panel |
| 1EU |
High Output Power for SN prefix greater than or equal to 4928. |
| 1EZ |
Extended Support Life of 5 to 10 years after product discontinuance |
| 1SM |
Scan modulation |
| 2E1 |
Adds a step attenuator for SN prefix greater than or equal to 4928. |
| 2EH |
Adds improved harmonics below 2 GHz for units with Option 1EU or SN prefix greater than or equal to 4928. |
| 2EU |
Adds high output power (Option 1EU) for SN prefix less than 4928 without Option 1EA. |
| 2NW |
Adds narrow pulse modulation for units with Option 1EU or SN prefix greater than or equal to 4928. |
| 2NX |
Adds ultra-low phase noise performance for SN prefix greater than or equal to 4928. |
| 3EU |
Adds high output power (Option 1EU) for SN prefix less than 4928 with option 1EA. |
| 520 |
250 KHz to 20 GHz Frequency Range |
| 532 |
250 KHz to 31.8 GHz Frequency Range |
| 540 |
250 KHz to 40 GHz Frequency Range |
| 550 |
250 KHz to 50 GHz Frequency Range |
| 567 |
250 KHz to 67 GHz Frequency Range |
| 707 |
Standard adapter set, 3.5mm F to 3.5mm F |
| 708 |
Standard adapter set, type-N M to 3.5mm F |
| 709 |
Standard adapter set, 2.4 mm |
| 710 |
Standard adapter set, 1.85mm F to 1.85mm F |
| 881 |
Analog Modulation Suite - includes step attenuator, AM, FM, phase modulation, scan modulation, low frequency generator and narrow pulse modulation |
| AB1 |
Korea Quick Users Guide (Korean localization) |
| AB2 |
China Quick Users Guide (Chinese localization) |
| ABA |
U.S. Quick Users Guide (English localization) |
| ABD |
Germany Quick Users Guide (German localization) |
| ABE |
Spain Quick Users Guide (Spanish localization) |
| ABF |
France Quick Users Guide (French localization) |
| ABJ |
Japan Quick Users Guide (Japanese localization) |
| ABZ |
Italy Quick Users Guide (Italian localization) |
| C09 |
Moves all connectors to rear panel except RF OUTPUT Connector |
| CD1 |
CD-ROM - English documentation set |
| H1G |
Add 1GHz external phase reference |
| H1K |
100 kHz frequency extension |
| H1S |
Add 1 GHz external frequency reference to improve spectral purity |
| H20 |
20 dBm maximum RF output power for CW frequencies 3.2 GHz to 20 GHz, at temperature of 25degC, for instruments with opts 520,1EA,1E1 |
| H23 |
+23 dbm power output for frequencies 9GHz, 25degC, option 520,1EA,1E1 |
| H30 |
Add internal mixer for up conversion in the 20 to 40 GHz Models |
| H42 |
Provides a unique firmware revision and Preset condition |
| H43 |
US Air Force TISS program |
| H44 |
Frequency range from 250 kHz to 43.5 GHz |
| H5K |
Provides inverted EXT1 input with 5000-ohm input impedance instead of 600 ohms |
| H60 |
Add internal mixer for up conversion in the 40 to 67 GHz Models |
| H65 |
Provides M9D-2065LNV mixer with two 2.4mm F connections on rear panel. RF 65GHz, LO 30GHz with doubler, 22GHz IF |
| HA1 |
Improved Phase Noise performance for AFMETCAL |
| HA2 |
Specified integrate phase noise for CW at 8.5GHz with offset from 10Hz to 1MHz |
| HA7 |
Provides plots of phase noise at 16GHz and 18GHz, and a plot of 2nd harmonics |
| HAR |
Improved Phase Noise Below 500 MHz |
| HCC |
Provides 250MHz - 10GHz In and Out on the rear panel |
| HE1 |
AFMETCAL SSG special |
| HEU |
High output power for frequency below 3.2 GHz |
| HNS |
Narrow pulse modulation to 31.8 GHz |
| HSM |
Add Scan Modulation |
| K45 |
24 inch rack mount slide kit with flange and brackets |
| R-50C-011-3 |
3 year upfront calibration support plan |
| R-50C-016-3 |
17025 CAL UPFRONT SUPPORT PLAN, 3YRS |
| R-51B-001-3C |
1 year Return-to-Agilent warranty extended to 3 years |
| R-51B-001-C |
1 year Return-to-Agilent warranty |
| R-52A-001-3 |
3 Year Calibration License (Commercial) |
| R-52A-001-L |
Lifetime Calibration License (Commercial) |
| R-52A-002-3 |
3 Year Calibration License (Z540/17025) |
| R-52A-002-L |
Lifetime Calibration License (Z540/17025) |
| RMKT |
Agilent Refurbished Product (Do Not Use - Certiprime Option) |
| S03 |
Oleson Microwave Labs model S03MS-AG 220 - 325 GHz mm source module @ -25 dBm |
| S05 |
Oleson Microwave Labs model S05MS-AG 140 - 220 GHz mm source module @ -12dBm |
| S06 |
Oleson Microwave Labs model S06MS-AG 110 - 170 GHz mm source module @ -6dBm |
| S08 |
Oleson Microwave Labs model S08MS-AG 90 - 140 GHz mm source module @ -2 dBm |
| S10 |
Oleson Microwave Labs model S10MS-AG 75 - 110 GHz mm source module @ +5dBm |
| S12 |
Oleson Microwave Labs model S12MS-AG 60 - 90 GHz mm source module @ +6dBm |
| S15 |
Oleson Microwave Labs model S15MS-AG 50 - 75 GHz mm source module @ +8dBm |
| UK6 |
Commercial calibration with test results data |
| UN5 |
Standard output power |
| UNC |
Standard connector ( 3.5 mm ) |
| UND |
Internal dual arbitrary waveform generator |
| UNE |
Standard connector, 1.85 mm |
| UNF |
No pulse modulation |
| UNG |
No AM, FM, and phase modulation |
| UNM |
Standard Front and Rear Panel Connector Configuration |
| UNN |
No step attenuator |
| UNP |
Standard spectral purity |
| UNR |
Enhanced phase noise |
| UNT |
AM/FM/Phase Modulation and LF Output |
| UNU |
Pulse Modulation (150 nS) |
| UNW |
Narrow Pulse Modulation (20 nS) |
| UNX |
Ultra low Phase Noise |
